How To Open Playstation Remote
-
Using the Phillips #00 Screwdriver, remove the 4 6.0 mm screws securing the rear cover to the controller.
-
Beginning with the left handle:
-
Compression the left handle of the controller to innovate an opening.
-
Wedge a plastic opening tool into the opening and slide it upwards towards the joystick.
-
Pull down on the plier to crack open up the casing.
-
Echo these steps for the right handle.
-
Wedge a plastic opening tool into the case-splittings and pull down to crack open the casing virtually the post-obit buttons:
-
Share button
-
Options push
-
Split the plastic covers of the controller apart, taking note that they will still exist attached by circuit board ribbons.
-
2 Trigger Springs
-
ane Greyness Reset Push button Extension
-
Remove the single half dozen.0 mm Phillips spiral institute below the battery retainer with the Phillips #00 Screwdriver.
-
Gently detach the touchpad ribbon connected to the motherboard using the blunt forceps. The touchpad ribbon is continued to the motherboard by a connector that flips to tighten and loosen. During reassembly, to reattach the ribbon, the plastic tray will demand to exist gently removed from the motherboard and the flip-lock flipped up.
-
Carefully dislodge the motherboard associates from the forepart cover.
-
Vibration motors are loosely attached to the motherboard associates. Provide back up at the two ends to ease the separation.
-
Successful disassembly of the controller will result in the following 3 parts, respectively:
-
Motherboard Assembly
-
Forepart Cover
-
Rear Encompass
How To Open Playstation Remote,
Source: https://www.ifixit.com/Guide/Disassembling+DualShock+4+Motherboard+Assembly/22679
Posted by: oconnerplund1937.blogspot.com
0 Response to "How To Open Playstation Remote"
Post a Comment